 |
Kitchen Cabinet
Hardware
Here are 2 sets of latches
suitable for "Hoosier", Sellers, and other brands of
kitchen cabinets. Almost all original hardware for this type of
furniture was nickel-plated brass. We offer all latches and
hinges in both Polished Brass and Nickel Plated brass. |
H201 Polished Brass
H201N Nickel Plate
3-7/8"w x 2-3/8"h |
H202 Polished Brass
H202N Nickel-Plated
1-3/4"w x 2"h |
|
( a set includes
left & right catches in both offset and flush) |
#715
Large Flour Bin
19" wide x 9-1/2" deep x
25" high includes mounting bracket and removable bracket
and removable lid that allows the bin to be pulled out and
filled from the top. This large flour bin mounts in long
compartment on left side of many old kitchen cabinets. Allow
11" width and 10" depth for mounting bracket. It may
be necessary to install wood shim inside cabinet top to allow
flour bin to clear the top of the door frame. |
 |
 |
 |
H101
Polished Brass
H101N Nickel-Plate
2-1/4"w x 1-1/2"h
3/8" offset |
H102 Polished
Brass
H102N Nickel-Plate
2-1/4"w x 1-1/2"h
3/8" offset |
H104
Polished Brass
H104N Nickel-Plate
1-1/2"w x 1-1/4"h
3/8" offset
|
F3 Solid brass stamping
F3N Nickel-Plate finish
3-3/8"w x 1-1/2"h
Boring: 2-13/16"
|
H402 Hoosier Nameplate Solid Brass
plate w/black lettering 3-1/2"w x 1"h
 |
H205
Polished Brass, Right door
H205N Nickel-Plate, Right door
H206 Polished Brass, Left door
H206N Nickel-Plate, Left door
1-3/16"w x 2"h
Includes flush and offset catches.
H403 Sellers Nameplate
Solid Brass plate with lettering
2-9/16"w x 11/16"h
|
Oak Hoosier Cabinet Roll
W31590
20" High x 27-3/4" Wide
Can be cut to desired width. |
P107N Nickel-Plate
P107 Solid Brass Casting
3-5/8" x 5/8"h, Boring: 2-15/16"
|
P108 Solid Brass Casting
3-1/8"w x 5/8"h
Boring: 2-3/8" |
HNT4
Ant Trap sold per each
TC-1
Tambour Cloth
Unbleached 100" cotton duck
cloth. Size: 45"w x 24" long |
2-3/16" dia.
Replacement
for ant traps used by
Hoosiers, Sellers, McDougall, and
other cabinet manufacturers.
Solid Brass
 |
P127
Brass
P127N Nickel Plate
3" long x 1/4"h
Roll Door Lift
N1392
B/P Steel
N1342
N/P Steel
1-3/8"h x 1-11/16"w |
H401N
Nickel Plate
H401
Polished Brass
1/8" dia. 1 Machine and
1 wood screw included. |
|