L9SP- Entrance Lock set; comes with lock, catch plate, lock cylinder and
2 keys. Lock Body: 5-1/2" tall x 3-3/8" deep x 13/16" w. Lock face is 1"w x 7-9/16" long x 3/16" thick. Ctr of the lock cyl to the ctr of the door knob
spindle is 3-3/4". Backset: 2-1/2" including the thickness of the lock
face. Distance from the knob latch hole to the ctr of the doorknob
spindle: 2-1/2" lock catch plate is 1-1/4" x 4-7/8" cylinder is 1-3/8" dia.
on the outside. L911- Complete entrance lock set with trim. In addition
to the lock described in L9SP you receive both inside and outside door
plates and a pair of doorknobs. Stamped outside door plate: 10"x2-3/4"
Stamped Inside doorplate with turn latch knob attached: 7"x2-1/4" door
knob receiver holes in both door plates: 11/16". Hollow plain doorknobs
are 2-1/4" dia. with 2 set screws. All lacquered.

L9- Victorian style fully mortised door lock for square
shaft door knobs. The lock has a fully reversible bolt
so the lock can be used for either right hand or left
hand opening doors. The locking bolt utilizes a key
from either side. Case: 4:tall, 3:deep, 1.2" thick.
Backset: 2-1/4" ctr of square shaft bit to ctr of the 
round part of the keyhole is also 2-1/4"." lock face:
7/8" x 6". Lock catch plate less tongue protrusion:
1" x 4-1/2".

All kick plates polished brass and lacquered.
M2028- 28" x 6" Fits 30" to 32" door
M2030- 30" x 6" Fits 32" to 36" door
M2034- 34" x 6" Fits 36" or wider doors.

L6 Latch set for all door
knobs with star pattern bit
for square and diaganol
spindles- backset: 2-3/8"
install by drilling 7/8" hole
and recess for the 1" x 2-1/4"
latch face. Catch plate:
1" x 2-3/4". Fits doorknob
shafts 1/4" to 9/32" and
works perfect with all our
door hardware.

Solid Brass Towel Bars
TR24- 24" Towel bar w/ends
TR36- 36" Towel bar w/ends
Both have rods of 1" dia. and
heavy cast ends- lacquered.

Cast Brass floor register and "clean
air" return grills, available in 2 sizes.
ZM1912- 13-3/4" x 11-3/4" outside, will fit minimum rough opening of 11-3/4"
x 9-3/4". M1916- 20" x 16-1/2" outside,
will fit a minimum rough opening of 18" x 14".